How To Drain Water From Your Yard

Standing water in the yard is a very unattractive feature of a person’s property not only due to its aesthetically displeasing characteristic, but also because of the potential water damage that it can cause to the property if there is enough of it in the right area. The owner’s first instinct to fix this problem is to try and plant things in the area where the water tends to build up, but this will not typically work. Any plants that are put in an area that floods from time to time will drown and die. Getting rid of the standing water on your property is not too difficult most of the time, since the problem usually lies simply with the elevation of the part of the yard that is affected the most.

If it is a problem with the elevation of the flooded area, then all you really need to do is add soil to that area and make it level with the rest of your yard. This will keep the flooding at bay as long as the water builds up as a result of heavy rain. Plant some grass over it both to hide the soil and to keep it in place.

Installing a drainage system is also an option, but you need to contact your local building commission and be certain that you will be allowed to build a drainage system. Building permits can be tricky and you need to make sure that your building project is on the up and up before you start working on anything.

Digging a French drain is not very difficult to do. Dig a little ditch in your yard and lay a piece of PVC pipe down inside it. Cover it up with gravel and this will direct the water anywhere you want it to, like a city sewer or ditch. When you dig it, you need to be sure that the highest point of the pipe is in the area that you want to drain and that the lowest point is where you want the water to drain to. You need to make the pipe slant downhill 6 inches for every 100 feet. To keep soil from getting in the pipe, you should install a strainer over the end. A simple sink strainer capped over the end could work for this or a piece of wire mesh. A strainer at the lower end is not needed.