Quite a few homes have fireplaces, but not all of them are fit to be used as they are because they have not been cleaned in so long that when you do try to use them, it fills the house with smoke. This can do a lot of damage to the inside of the home, including ruin the paint on your walls, your curtains, and discolor your carpet. It is also a health risk, since breathing this in is not good for anyone, but the elderly, people with allergies, pets, and children are especially affected. Fortunately, though, in most situations you can make a fire that will not smoke up your house without much trouble as long as you follow a few rules.
The damper of your chimney needs to be open before you do anything. Burn some paper or other easily combustible materials in the fireplace, because you want to warm the chimney up. Cold air in the chimney is will push the warm air down and cause the smoke to fill up the room.
Open up the windows in the house and make sure that there is enough air circulating to ignite the fire. A home that is insulated well might not have enough of a draft to allow the wood to catch on fire.
You should also have some fireplace bricks underneath the grill to add some more air circulation to the process. More draft in the fireplace will make it easier for the fire to ignite.
The top of the fireplace also needs to be cleaned out regularly, since anything that gets stuck in it like leaves, sticks, bird nests can keep the smoke from being able to escape and so it floods back into the house, which is exactly where you do not want it.
You should also have the fireplace cleaned by a professional cleaning service if possible, since a layer of creosote is likely built up on the inside of the chimney. This is a tar-like substance that results from burning wood in the fireplace and if your chimney has not been professionally cleaned before and you have lived in your house for many years, then it is time for it to be. Creosote can catch on fire and cause the whole house to burn down, so having it cleaned out is essential.
To keep your fireplace functioning the way that it should, you need to know how to use it and take care of it and by the time winter gets to you, you will be able to enjoy your fireplace once again.
Jim Corkern is a writer and promoter of quality
Mold Remediation and
water damage restoration> companies across the united states.
Thursday, October 18, 2007
Restoring Smoke Damaged Clothes
Anyone who has been the victim of a house fire will tell you that the cleanup that you have to do afterward is a huge chore and that a lot of things in your house will either have to be cleaned thoroughly or have to be replaced. Unfortunately, this includes something that everyone has to use on a daily basis: clothing. The vast majority of us have to wear clothing every day of our lives and if a fire were to affect our whole wardrobe, a lot of us would be in some trouble.
Fortunately for us, though, cleaning smoke damaged clothing is not always as difficult as some might make it out to be. You will need to sort your clothing fairly heavily, though, since there are so many factors involved. How soiled the clothing is, what it is made out of, and what color it is. This will be the most time consuming part of the whole task.
Some things will need to be dry cleaned, but you do not want to take these to a normal dry cleaning service. Make sure that the dry cleaning service that you are dealing with has experience in dealing with smoke damaged clothing items.
Sort your clothes. Lightly soiled clothing should be put into one group and heavily soiled items into another. Sort them further by dividing them into kinds of fabric. Put synthetic fabrics into one pile and organics such as wool and cotton in another. Further sort them by color type. Bright warm colors, cool colors, dark colors, and reds should be given their own group. Do not be concerned over whether there is enough in each pile to constitute a full load. Washing them separately like this is necessary.
Before you wash the heavily soiled clothing, take them outside and shake them out. The excess soot and ash need to be removed so that the water in the washing machine does not become too saturated with dirt to be of any real use. Heavily soiled clothes should be washed twice or more.
Use as much detergent as the washer requires and add about a cup of water conditioner to the mix. Some all-fabric bleach can also be used. Use as much water as your machine can handle for each load.
Synthetic items should be washed in warm water so that they do not start to wrinkle during the washer’s spin cycle. Wrinkles can be difficult to remove from synthetic fabrics.
Hang the clothes out to dry instead of using the dryer, but do not do this in your basement or a confined area. Clothes should never be hung to dry inside the house; only do this outside. After they dry, smell them and see if the smoke odor is still there. If it is, wash them again and repeat the drying process.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Fortunately for us, though, cleaning smoke damaged clothing is not always as difficult as some might make it out to be. You will need to sort your clothing fairly heavily, though, since there are so many factors involved. How soiled the clothing is, what it is made out of, and what color it is. This will be the most time consuming part of the whole task.
Some things will need to be dry cleaned, but you do not want to take these to a normal dry cleaning service. Make sure that the dry cleaning service that you are dealing with has experience in dealing with smoke damaged clothing items.
Sort your clothes. Lightly soiled clothing should be put into one group and heavily soiled items into another. Sort them further by dividing them into kinds of fabric. Put synthetic fabrics into one pile and organics such as wool and cotton in another. Further sort them by color type. Bright warm colors, cool colors, dark colors, and reds should be given their own group. Do not be concerned over whether there is enough in each pile to constitute a full load. Washing them separately like this is necessary.
Before you wash the heavily soiled clothing, take them outside and shake them out. The excess soot and ash need to be removed so that the water in the washing machine does not become too saturated with dirt to be of any real use. Heavily soiled clothes should be washed twice or more.
Use as much detergent as the washer requires and add about a cup of water conditioner to the mix. Some all-fabric bleach can also be used. Use as much water as your machine can handle for each load.
Synthetic items should be washed in warm water so that they do not start to wrinkle during the washer’s spin cycle. Wrinkles can be difficult to remove from synthetic fabrics.
Hang the clothes out to dry instead of using the dryer, but do not do this in your basement or a confined area. Clothes should never be hung to dry inside the house; only do this outside. After they dry, smell them and see if the smoke odor is still there. If it is, wash them again and repeat the drying process.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Water Damage Risk Areas
Correcting the water damage in your bathroom is usually a time consuming task depending on the severity of it, but the prevention of such damage is usually within the reach of most homeowners. The fact is that preventing this damage is usually much, much easier than the act of having to actually repair it after it has already occurred. Steam from showers and baths can discolor ceilings and cause mold growth, overflowing toilets onto cracked tile can lead to rotting of the floor underneath it, and there is always the possibility of mold growth. You should do what you can to protect this room in your home, since it is one of the most important rooms along with the kitchen.
There are a few different areas of your bathroom that you need to keep an eye on and look for any sign of abnormalities in on a regular basis. These areas that are the most at risk are the toilet, shower, bath tub, and the sink.
The bath tub and shower usually require some special attention, since these are the largest sources of water in the room and present the most risk. Over time, the tiles around the tub and shower can become cracked and if it is allowed to overflow, the floor underneath can become so damaged that the whole floor will need to be taken up and redone. Missing grout can also cause this. Repair the tile floor as soon as you notice cracks in it. Also make sure that the caulking around the tub is not loose or missing and if it is, you should re-caulk this yourself or have a professional do it for you.
Check the plumbing underneath the sink and make sure that there are no leaks. Loose seals in this plumbing should be replaced as soon as possible, as well.
The toilet can also overflow and the tile around this area can also be breached if it is cracked, so in the same manner as the area around the tub, the cracked tile needs to be dealt with. Keep your toilet from overflowing by not putting more paper in the toilet than it can handle. A lid lock can be purchased and put on toilets in homes that have small children that are prone to putting things in the toilet that do not belong there.
If you can see signs of moisture on the drywall, then you might also have a problem in the plumbing running through the walls. You need to call in a professional to deal with this problem.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
There are a few different areas of your bathroom that you need to keep an eye on and look for any sign of abnormalities in on a regular basis. These areas that are the most at risk are the toilet, shower, bath tub, and the sink.
The bath tub and shower usually require some special attention, since these are the largest sources of water in the room and present the most risk. Over time, the tiles around the tub and shower can become cracked and if it is allowed to overflow, the floor underneath can become so damaged that the whole floor will need to be taken up and redone. Missing grout can also cause this. Repair the tile floor as soon as you notice cracks in it. Also make sure that the caulking around the tub is not loose or missing and if it is, you should re-caulk this yourself or have a professional do it for you.
Check the plumbing underneath the sink and make sure that there are no leaks. Loose seals in this plumbing should be replaced as soon as possible, as well.
The toilet can also overflow and the tile around this area can also be breached if it is cracked, so in the same manner as the area around the tub, the cracked tile needs to be dealt with. Keep your toilet from overflowing by not putting more paper in the toilet than it can handle. A lid lock can be purchased and put on toilets in homes that have small children that are prone to putting things in the toilet that do not belong there.
If you can see signs of moisture on the drywall, then you might also have a problem in the plumbing running through the walls. You need to call in a professional to deal with this problem.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Water Sanitation Options
The most important thing that you need to have plenty of on hand during a hurricane or tropical storm is simply clean water. Clean water may be more difficult to obtain during these times than you might think, so you need to try and have plenty of it stocked up beforehand if you live in an area that is prone to having these serious storms. If you happen to run out before the storm is completely over, though, there are a few things that you can do to make sure that you have enough to last you.
For every person that will be with you during the storm, you should be saving at least one gallon for them per day for use.
An electricity generator that is powered by gas might be a good thing to have around, as well, since electricity tends to go out during hurricanes and tropical storms, affecting your ability to boil water for drinking. You can boil water on your stove for about 10 minutes or so and make it safe to drink as long as you filter out any sediment that might be in it first. Do not drink flood water, since this will likely have more in it than you can get rid of by simply boiling it.
If you do not have electricity, using chlorinated bleach to sanitize water is also a good idea. You only have to use a couple of drops for each gallon of water you want to sanitize. Be aware that you should only use regular chlorinated bleach for this process. Do not use lemon or any other scented bleach.
When you filter water out of your tap for boiling, you should pour this through a clean (white, if possible) cloth and let the water set until it is no longer cloudy. Do not under any circumstances drink water straight out of the tap after the storm has hit, since your water treatment plant could be contaminated. Do not drink water out of the tap that has not been boiled until your local government says that your tap water is safe to drink.
If you do not have electricity or bleach, then using some water purification tablets to sanitize your water is also an option. Purchase some of these at an outdoor supply store where hiking and camping supplies are.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Dallas Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
For every person that will be with you during the storm, you should be saving at least one gallon for them per day for use.
An electricity generator that is powered by gas might be a good thing to have around, as well, since electricity tends to go out during hurricanes and tropical storms, affecting your ability to boil water for drinking. You can boil water on your stove for about 10 minutes or so and make it safe to drink as long as you filter out any sediment that might be in it first. Do not drink flood water, since this will likely have more in it than you can get rid of by simply boiling it.
If you do not have electricity, using chlorinated bleach to sanitize water is also a good idea. You only have to use a couple of drops for each gallon of water you want to sanitize. Be aware that you should only use regular chlorinated bleach for this process. Do not use lemon or any other scented bleach.
When you filter water out of your tap for boiling, you should pour this through a clean (white, if possible) cloth and let the water set until it is no longer cloudy. Do not under any circumstances drink water straight out of the tap after the storm has hit, since your water treatment plant could be contaminated. Do not drink water out of the tap that has not been boiled until your local government says that your tap water is safe to drink.
If you do not have electricity or bleach, then using some water purification tablets to sanitize your water is also an option. Purchase some of these at an outdoor supply store where hiking and camping supplies are.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Dallas Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Water Sanitation Using Heat and Bleach
When you are having to sit a hurricane out in your home or other building, the most important thing that you need to have plenty of is clean water. Hurricanes are often something that we can prepare for in the United States, since we can typically see them coming, but failing to pay attention to the weather reports during hurricane season does happen to some of us.
You should have on hand about a gallon of clean water for every person staying with you. This will be used up in a day’s time, so having one gallon for every person for every day you expect the storm to last plus a few is a good idea.
Having a gas powered electricity generator is something else that you might want to have on hand, especially if you might not have enough water. If the electricity goes out and you run out of water, you will not be able to boil any water to make sure that it is sanitary before you drink it. During storms like this you should never assume that the tap water is alright to drink. Local water treatment plants could be contaminated with all kinds of things during this inclement weather and you should never drink it until the storm clears and your local government okays it.
Boiling water is the best way to sanitize it if you have no other means of doing so, such as a high quality water filter. Bring the water to a boil and keep it like this for about 5 to 10 minutes. Covering the boiling pot of water should shorten the time necessary to get the water boiling and will help you save fuel.
Liquid Clorox bleach can also be used to sanitize water. It can be used to purity tap water and make it safe for you to drink. This will kill any bacteria and microorganisms living in it and the process is fairly simple.
Any water should be let to stand in a container until any debris or sediment settles to the bottom. The clear water should be poured into another container, leaving the water still containing sediment in the bottom of the first one. You only need to use a couple of drops of bleach per quart of water.
As a backup for boiling and bleach, you can also purchase water purification tablets at most outdoor supply stores. People who go camping or hiking often take these with them in case they need them, but you can also benefit from keeping a few on hand.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
You should have on hand about a gallon of clean water for every person staying with you. This will be used up in a day’s time, so having one gallon for every person for every day you expect the storm to last plus a few is a good idea.
Having a gas powered electricity generator is something else that you might want to have on hand, especially if you might not have enough water. If the electricity goes out and you run out of water, you will not be able to boil any water to make sure that it is sanitary before you drink it. During storms like this you should never assume that the tap water is alright to drink. Local water treatment plants could be contaminated with all kinds of things during this inclement weather and you should never drink it until the storm clears and your local government okays it.
Boiling water is the best way to sanitize it if you have no other means of doing so, such as a high quality water filter. Bring the water to a boil and keep it like this for about 5 to 10 minutes. Covering the boiling pot of water should shorten the time necessary to get the water boiling and will help you save fuel.
Liquid Clorox bleach can also be used to sanitize water. It can be used to purity tap water and make it safe for you to drink. This will kill any bacteria and microorganisms living in it and the process is fairly simple.
Any water should be let to stand in a container until any debris or sediment settles to the bottom. The clear water should be poured into another container, leaving the water still containing sediment in the bottom of the first one. You only need to use a couple of drops of bleach per quart of water.
As a backup for boiling and bleach, you can also purchase water purification tablets at most outdoor supply stores. People who go camping or hiking often take these with them in case they need them, but you can also benefit from keeping a few on hand.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Subscribe to:
Posts (Atom)
