The prevention of water damage in most areas of your home is fairly easy, it just usually takes a bit of diligence on your part to make sure that the rest of your household helps you in this task. Preventing this damage from occurring is typically much, much easier to accomplish and cheaper than having to repair the damage after it has happened. Whether it is the discoloration of drywall from steam, damaged floorboards due to cracked tiles, or replacing vanities because of leaks under the sink, the cost of actually preventing this damage from happening usually hovers around zero. Since the bathroom is one of the most valuable areas of your home, you should do what you can to safeguard it.
Keeping an eye on the water junctions in your bathroom is something you will definitely want to do to protect the investment that is your bathroom. These junctions are the shower, bath tub, sink, and the toilet.
The steam that comes off of the bath tub and shower can cause damage to the upper walls and ceiling, so installing an exhaust fan to get rid of this excess moisture buildup is a pretty good idea. Any room in your home that has moisture buildup like this should have an exhaust vent so the vapor does not become absorbed by the ceiling.
Tile that has missing grout or tile that is cracked should be replaced as soon as possible, because this allows water underneath it and will cause damage to the floor boards. This can eventually become so bad that the floor underneath has to be replaced, so replacing a few individual tiles or filling in missing areas of grout is much easier than doing that level of repair.
Look for signs of moisture on the walls of your bathroom, since this could mean that there is a leak in the plumbing in the wall.
Even though you may not see these every day, keep a watch on the plumbing that is underneath your bathroom sink. Having leaks in these pipes can cause the bottom of a vanity to rot and need replacing or if the pipes are not hidden by a cabinet, you will have visible standing water on the bathroom floor.
You should also do what you can to make sure that the toilet does not get stopped up with excess toilet paper, feminine napkins, or other things that do not belong there. Toddlers are notorious for putting items in the toilet like toy cars, so purchasing a lid lock may be a good idea if you have any of these in your home on a regular basis.
Tuesday, January 22, 2008
Well Water Sanitation
There are thousands of people in the United States that have to rely on well water instead of a city water system for the water that they both bathe and drink in. While there are some filters that you can have installed onto your well to rid the water supply of rust, soil, or other particle debris, there are not really any filters currently that disinfect your water and rid it of bacteria that may be growing in it, such as E. coli. Cleaning the water yourself manually, though, is always an option by simply using unscented chlorine bleach.
Most people chlorinate their well water to disinfect it after some kind of repair has been done, after the well has not been utilized in a long time (like with a summer or winter home), to get rid of bacteria living in it, or to remove hydrogen sulfide buildup.
Before you start the process of cleaning your well water, you need to get enough water put back in jugs or buckets in your house to last the occupants of it for at least the next 24 hours. The water system in your home should not be used during this 24 hours period at all.
You need to use an unscented bleach for this job. This will have around 3 to 5 percent of sodium chlorite. You will need to use a different amount in your well depending on how deep and how wide your well is. If the well is under 50 feet in depth and about 6 inches in diameter, you will need to use between 3 and 4 liters of bleach.
Your water supply should not smell like chlorine after the 24 hours is up. If it does, you will need to wait longer for the chlorine to be flushed from the system. You should not drink the water until it no longer smells like bleach.
If you notice a significant change for the better in the quality of your water supply after you finish this process, but the issue returns in the next couple of weeks or longer, the process will need to be repeated and you should probably add a bit more bleach to the water. Repeat the process until the results last or seek help from a professional. It will be worth it in the long run when you do not have to worry about the safety of your home’s water supply.
Most people chlorinate their well water to disinfect it after some kind of repair has been done, after the well has not been utilized in a long time (like with a summer or winter home), to get rid of bacteria living in it, or to remove hydrogen sulfide buildup.
Before you start the process of cleaning your well water, you need to get enough water put back in jugs or buckets in your house to last the occupants of it for at least the next 24 hours. The water system in your home should not be used during this 24 hours period at all.
You need to use an unscented bleach for this job. This will have around 3 to 5 percent of sodium chlorite. You will need to use a different amount in your well depending on how deep and how wide your well is. If the well is under 50 feet in depth and about 6 inches in diameter, you will need to use between 3 and 4 liters of bleach.
Your water supply should not smell like chlorine after the 24 hours is up. If it does, you will need to wait longer for the chlorine to be flushed from the system. You should not drink the water until it no longer smells like bleach.
If you notice a significant change for the better in the quality of your water supply after you finish this process, but the issue returns in the next couple of weeks or longer, the process will need to be repeated and you should probably add a bit more bleach to the water. Repeat the process until the results last or seek help from a professional. It will be worth it in the long run when you do not have to worry about the safety of your home’s water supply.
What to Throw Out After a Flood
After a flood has made its way through your home, you are going to be doing a lot of wondering about what you need to try and repair and what needs to be just thrown away. There are a number of items in your house that are going to be better off thrown out instead of you trying to repair them or refurbish them in any way.
One thing that is going to need to be definitely thrown away is food. Any foods in your home will need to be thrown out, including everything in the refrigerator and in the cabinets, even if they did not come into contact with the water directly. If the home was under water for more than 48 hours, the humidity in the home will have gotten so high that it is likely that they have started to mold or at the very least, have become contaminated.
Items such as bedding that is full of padding, like pillows, will most likely need to be thrown out. These thick items are difficult to disinfect entirely and dry out. Not only bacteria have likely contaminated these items, but sewage and other chemicals, as well. Trying to clean these items is probably going to be more trouble than it is worth in the long run and simply purchasing new bedding may be more efficient.
Children’s toys that are porous such as stuffed animals will need to be thrown out. Items contaminated with sewage and chemicals like this or have been contaminated with mold will need to be thrown away because getting them completely safe to be played with again is very difficult. The padding inside these items soaking up soil, sewage, and other chemicals is what makes them so difficult to clean. Plastic toys can be disinfected with cleaners such as Lysol or bleach.
Wooden furniture may become molded if the flood water and the chemicals that it may contain penetrate the finish. These will need to be disinfected and refinished after the flood is over.
Upholstered furniture will usually need to be thrown out if it has been sitting in flood water for more than 24 hours. Soil and sewage will penetrate the outer fabric after a while and be extremely difficult to clean. Much like carpet padding, it will need to be thrown out. Upholstered furniture can be re-upholstered, but this usually comes at a great expense and it is often much easier to just buy a new couch or chair.
One thing that is going to need to be definitely thrown away is food. Any foods in your home will need to be thrown out, including everything in the refrigerator and in the cabinets, even if they did not come into contact with the water directly. If the home was under water for more than 48 hours, the humidity in the home will have gotten so high that it is likely that they have started to mold or at the very least, have become contaminated.
Items such as bedding that is full of padding, like pillows, will most likely need to be thrown out. These thick items are difficult to disinfect entirely and dry out. Not only bacteria have likely contaminated these items, but sewage and other chemicals, as well. Trying to clean these items is probably going to be more trouble than it is worth in the long run and simply purchasing new bedding may be more efficient.
Children’s toys that are porous such as stuffed animals will need to be thrown out. Items contaminated with sewage and chemicals like this or have been contaminated with mold will need to be thrown away because getting them completely safe to be played with again is very difficult. The padding inside these items soaking up soil, sewage, and other chemicals is what makes them so difficult to clean. Plastic toys can be disinfected with cleaners such as Lysol or bleach.
Wooden furniture may become molded if the flood water and the chemicals that it may contain penetrate the finish. These will need to be disinfected and refinished after the flood is over.
Upholstered furniture will usually need to be thrown out if it has been sitting in flood water for more than 24 hours. Soil and sewage will penetrate the outer fabric after a while and be extremely difficult to clean. Much like carpet padding, it will need to be thrown out. Upholstered furniture can be re-upholstered, but this usually comes at a great expense and it is often much easier to just buy a new couch or chair.
Wood Rotting Mold
A mold that plagues some homes and should not be underestimated is Meruliporia incrassate. This is a fungus that causes a severe amount of rotting in the wooden parts of your home and this is extremely difficult to get rid of, since is has the ability to collect and retain water over a longer period of time than other molds. It typically extends itself through not only the wood, but other porous materials that make up your home and find the water that it needs in order to stay alive.
The news calls this a “house eating fungus” because it will eventually do just that if it is left untreated. The decay of the wood framing of your home is inevitable if this infestation is not removed as soon as possible. This usually shows up in the areas of your home that are the most moist, such as the bathroom, kitchen, and the basement. This mold appears as a somewhat yellowish dust on the areas that are affected. In order to keep this growth from returning, you will need to remove all of the materials affected by it and then some. Simply trying to clean this mold with disinfectants or bleach will not work under any circumstances. Cleaning any other kind of mold off of a porous surface with bleach or any other disinfectant is usually not possible, but this kind of mold cannot be gotten rid of in this way at all.
About two extra feet of infected material needs to be removed from the home before the infestation will be gone for good. This means if the visible infection spans about 4 feet of a wooden beam, then an extra two feet needs to be removed on each side of it to be sure that you get all of it. This mold likes to extend strands of itself out about this length in order to retain the water that it will use to keep itself alive. Getting rid of this extra material may seem like a waste, but it is really the only way to be certain that it does not come back.
As long as your previously affected area remains dry for a long time after the infected wood was removed, the infection should not return. Keeping the previously affected area as dry as possible may help keep the mold from coming back, even if some of the wood remained infected after you removed the majority of it.
The news calls this a “house eating fungus” because it will eventually do just that if it is left untreated. The decay of the wood framing of your home is inevitable if this infestation is not removed as soon as possible. This usually shows up in the areas of your home that are the most moist, such as the bathroom, kitchen, and the basement. This mold appears as a somewhat yellowish dust on the areas that are affected. In order to keep this growth from returning, you will need to remove all of the materials affected by it and then some. Simply trying to clean this mold with disinfectants or bleach will not work under any circumstances. Cleaning any other kind of mold off of a porous surface with bleach or any other disinfectant is usually not possible, but this kind of mold cannot be gotten rid of in this way at all.
About two extra feet of infected material needs to be removed from the home before the infestation will be gone for good. This means if the visible infection spans about 4 feet of a wooden beam, then an extra two feet needs to be removed on each side of it to be sure that you get all of it. This mold likes to extend strands of itself out about this length in order to retain the water that it will use to keep itself alive. Getting rid of this extra material may seem like a waste, but it is really the only way to be certain that it does not come back.
As long as your previously affected area remains dry for a long time after the infected wood was removed, the infection should not return. Keeping the previously affected area as dry as possible may help keep the mold from coming back, even if some of the wood remained infected after you removed the majority of it.
Bathroom Humidity and Mold Problems
A relaxing bath or shower can be just what you need after a long day at work, but when you look up and around you and you see mold starting to grow on the walls, the relaxation usually gets ruined by the worry about that mold problem. It shows itself as a splotchy growth on the drywall and it usually moves slowly from one end of the room to the other. If left untreated, it will eventually cover the rest of your bathroom and then you really will not have much of a good time bathing.
Most of the time drywall that becomes contaminated needs to be taken out and thrown away, unless the growth is very new and superficial. If it is old growth and is found to be embedded into the wall, then the drywall cannot be cleaned, since it is such a porous surface. This is unfortunate, because tearing out drywall and replacing it can cost quite a bit, especially if you have to hire someone else to do it for you.
A lot of people seem to like installing carpet in their bathrooms, but what they may not realize is just what a very bad idea this is. Water and mold go hand in hand and once carpet gets wet and is allowed to stay that way on a continuing basis as it will be in a bathroom, it eventually begins to mold. When carpet gets moldy, the unfortunate fact about this, as with drywall, is that it usually has to be thrown out. Carpet can be cleaned, but the padding underneath it cannot and if mold continues to grow on the padding, any new carpet that you put over it will also be contaminated and so will the old carpet if you attempted to clean it.
Try to keep the humidity in the bathroom down by installing an exhaust vent to let steam and moisture out of the house. Also keep wet items of clothing and towels washed as often as possible and avoid letting them stay on the floor, especially a carpeted one.
Keep an eye on your toilet and make sure that it is flushing properly and that the members of your house are not putting too much toilet paper in it. Feminine napkins can sometimes be put into toilets, but this is usually only recommended for homes that are connected to city sewer systems. Homes with septic tanks tend to have a harder time with feminine napkins being put in the toilet and can stop up the whole system, particularly if the pipes are old and corr
Most of the time drywall that becomes contaminated needs to be taken out and thrown away, unless the growth is very new and superficial. If it is old growth and is found to be embedded into the wall, then the drywall cannot be cleaned, since it is such a porous surface. This is unfortunate, because tearing out drywall and replacing it can cost quite a bit, especially if you have to hire someone else to do it for you.
A lot of people seem to like installing carpet in their bathrooms, but what they may not realize is just what a very bad idea this is. Water and mold go hand in hand and once carpet gets wet and is allowed to stay that way on a continuing basis as it will be in a bathroom, it eventually begins to mold. When carpet gets moldy, the unfortunate fact about this, as with drywall, is that it usually has to be thrown out. Carpet can be cleaned, but the padding underneath it cannot and if mold continues to grow on the padding, any new carpet that you put over it will also be contaminated and so will the old carpet if you attempted to clean it.
Try to keep the humidity in the bathroom down by installing an exhaust vent to let steam and moisture out of the house. Also keep wet items of clothing and towels washed as often as possible and avoid letting them stay on the floor, especially a carpeted one.
Keep an eye on your toilet and make sure that it is flushing properly and that the members of your house are not putting too much toilet paper in it. Feminine napkins can sometimes be put into toilets, but this is usually only recommended for homes that are connected to city sewer systems. Homes with septic tanks tend to have a harder time with feminine napkins being put in the toilet and can stop up the whole system, particularly if the pipes are old and corr
How To Drain Water From Your Yard
Standing water in the yard is a very unattractive feature of a person’s property not only due to its aesthetically displeasing characteristic, but also because of the potential water damage that it can cause to the property if there is enough of it in the right area. The owner’s first instinct to fix this problem is to try and plant things in the area where the water tends to build up, but this will not typically work. Any plants that are put in an area that floods from time to time will drown and die. Getting rid of the standing water on your property is not too difficult most of the time, since the problem usually lies simply with the elevation of the part of the yard that is affected the most.
If it is a problem with the elevation of the flooded area, then all you really need to do is add soil to that area and make it level with the rest of your yard. This will keep the flooding at bay as long as the water builds up as a result of heavy rain. Plant some grass over it both to hide the soil and to keep it in place.
Installing a drainage system is also an option, but you need to contact your local building commission and be certain that you will be allowed to build a drainage system. Building permits can be tricky and you need to make sure that your building project is on the up and up before you start working on anything.
Digging a French drain is not very difficult to do. Dig a little ditch in your yard and lay a piece of PVC pipe down inside it. Cover it up with gravel and this will direct the water anywhere you want it to, like a city sewer or ditch. When you dig it, you need to be sure that the highest point of the pipe is in the area that you want to drain and that the lowest point is where you want the water to drain to. You need to make the pipe slant downhill 6 inches for every 100 feet. To keep soil from getting in the pipe, you should install a strainer over the end. A simple sink strainer capped over the end could work for this or a piece of wire mesh. A strainer at the lower end is not needed.
If it is a problem with the elevation of the flooded area, then all you really need to do is add soil to that area and make it level with the rest of your yard. This will keep the flooding at bay as long as the water builds up as a result of heavy rain. Plant some grass over it both to hide the soil and to keep it in place.
Installing a drainage system is also an option, but you need to contact your local building commission and be certain that you will be allowed to build a drainage system. Building permits can be tricky and you need to make sure that your building project is on the up and up before you start working on anything.
Digging a French drain is not very difficult to do. Dig a little ditch in your yard and lay a piece of PVC pipe down inside it. Cover it up with gravel and this will direct the water anywhere you want it to, like a city sewer or ditch. When you dig it, you need to be sure that the highest point of the pipe is in the area that you want to drain and that the lowest point is where you want the water to drain to. You need to make the pipe slant downhill 6 inches for every 100 feet. To keep soil from getting in the pipe, you should install a strainer over the end. A simple sink strainer capped over the end could work for this or a piece of wire mesh. A strainer at the lower end is not needed.
How to Sanitize Your Water
“Water, water everywhere and not a drop to drink” is a saying that most of us are familiar with and unfortunately for those of us who live in hurricane and tropical storm prone areas, there may be some real truth to it. The amount of water that is clean and sanitary to drink during these storms is very limited if you do not have enough water saved up in advance.
You need to keep plenty of clean bottled water on hand during hurricane season and doing this is not very difficult. Save milk jugs and store tap water in them. Try to keep them in an area of your home that is high up, so you are sure that flood waters will not contaminate them. Keep around at least one gallon of water for each person staying with you during the storm for every day you expect the storm to last and then some. Running out of clean water is not something you want to do.
Boiling tap water is an option if you have electricity. If not, a small gas powered generator can do the trick if you are without power for a significant period and can really be a life saver. Filter the water first through a cloth to get any sediment that may have gotten into the local water supply out before you let it set for a while. Put the clear water into a pot and boil for about ten minutes or so. This should give you clean water to drink or bathe in. You should never drink water from your faucet during a hurricane or flood, because of the risk of the local water supply being contaminated with sea water or sewage. Flood water or sea water also cannot be boiled to the point of being safe to drink, since it may be contaminated with more biohazards and chemicals than boiling can get rid of.
A couple of drops of bleach in a gallon of water can also sanitize it, but you should not use scented bleach for this. Allow the water to set for about 30 minutes or longer before drinking it. Do not be alarmed about this idea, since bleach has been used in water supplies for years to sanitize the water that we drink.
Water purification tablets are also available for purchase at most outdoor or camping supply stores. These can be used in the place of heat or bleach in sanitizing water.
You need to keep plenty of clean bottled water on hand during hurricane season and doing this is not very difficult. Save milk jugs and store tap water in them. Try to keep them in an area of your home that is high up, so you are sure that flood waters will not contaminate them. Keep around at least one gallon of water for each person staying with you during the storm for every day you expect the storm to last and then some. Running out of clean water is not something you want to do.
Boiling tap water is an option if you have electricity. If not, a small gas powered generator can do the trick if you are without power for a significant period and can really be a life saver. Filter the water first through a cloth to get any sediment that may have gotten into the local water supply out before you let it set for a while. Put the clear water into a pot and boil for about ten minutes or so. This should give you clean water to drink or bathe in. You should never drink water from your faucet during a hurricane or flood, because of the risk of the local water supply being contaminated with sea water or sewage. Flood water or sea water also cannot be boiled to the point of being safe to drink, since it may be contaminated with more biohazards and chemicals than boiling can get rid of.
A couple of drops of bleach in a gallon of water can also sanitize it, but you should not use scented bleach for this. Allow the water to set for about 30 minutes or longer before drinking it. Do not be alarmed about this idea, since bleach has been used in water supplies for years to sanitize the water that we drink.
Water purification tablets are also available for purchase at most outdoor or camping supply stores. These can be used in the place of heat or bleach in sanitizing water.
Mold Allergy Issues
Allergies plague millions of people the world over, whether the kind of allergy is related to food, pet dander, grasses, mold, or certain chemicals. The symptoms are usually the most prevalent during the spring, summer, and early fall and are caused by seasonal molds and plants. Molds simply lie dormant during the winter time and are unable to continue growing if they are exposed to freezing temperatures. Once spring comes back, mold spore levels in the outdoors skyrocket, wreaking havoc on those of us who happen to be allergic to certain varieties.
The allergy symptoms associated with mold are typically about the same as the allergy symptoms that are caused by almost anything else. Depending upon the severity of the allergy of the person affected, the symptoms can range from a simple runny nose all the way to a serious reaction requiring hospitalization. Children, the elderly, and anyone with a weakened immune system needs to be careful when it comes to just how much of their allergen that they come into contact with. Allergy symptoms related to mold can also seemingly be made worse by eating foods that have been processed containing mold. This can include cheeses made with mold like gorgonzola or blue cheese or just simple funguses like mushrooms. Beer and bread have also been known to worsen these reactions, since they are made with yeast, which is a fungus.
While the majority of molds in the world do not cause allergic reactions, there are a few genii that do. Most allergic reactions are caused by molds in Penicillium, Cladosporium, and Alternaria. Even though Penicillin is named after the genus Penicillium, there are molds in this genus that can cause allergic reactions just like the others.
Try to keep an eye on the mold spore reports that occur on your local news stations regularly, usually every morning, noon, and every evening. If you have children or elderly members of your family that are allergic to mold spores or have any other kind of allergy, you need to be careful about taking them out of the home during times of high spore or pollen counts. A mistake can be deadly if they are exposed to their allergen for a long period of time. If you have any doubts as to whether you should take them outside during these times, the best bet is to have them stay home.
The allergy symptoms associated with mold are typically about the same as the allergy symptoms that are caused by almost anything else. Depending upon the severity of the allergy of the person affected, the symptoms can range from a simple runny nose all the way to a serious reaction requiring hospitalization. Children, the elderly, and anyone with a weakened immune system needs to be careful when it comes to just how much of their allergen that they come into contact with. Allergy symptoms related to mold can also seemingly be made worse by eating foods that have been processed containing mold. This can include cheeses made with mold like gorgonzola or blue cheese or just simple funguses like mushrooms. Beer and bread have also been known to worsen these reactions, since they are made with yeast, which is a fungus.
While the majority of molds in the world do not cause allergic reactions, there are a few genii that do. Most allergic reactions are caused by molds in Penicillium, Cladosporium, and Alternaria. Even though Penicillin is named after the genus Penicillium, there are molds in this genus that can cause allergic reactions just like the others.
Try to keep an eye on the mold spore reports that occur on your local news stations regularly, usually every morning, noon, and every evening. If you have children or elderly members of your family that are allergic to mold spores or have any other kind of allergy, you need to be careful about taking them out of the home during times of high spore or pollen counts. A mistake can be deadly if they are exposed to their allergen for a long period of time. If you have any doubts as to whether you should take them outside during these times, the best bet is to have them stay home.
How To Clean Smoke Damaged Clothes
Anyone who has been the victim of a house fire will tell you that the cleanup that you have to do afterward is a huge chore and that a lot of things in your house will either have to be cleaned thoroughly or have to be replaced. Unfortunately, this includes something that everyone has to use on a daily basis: clothing. The vast majority of us have to wear clothing every day of our lives and if a fire were to affect our whole wardrobe, a lot of us would be in some trouble.
Fortunately for us, though, cleaning smoke damaged clothing is not always as difficult as some might make it out to be. You will need to sort your clothing fairly heavily, though, since there are so many factors involved. How soiled the clothing is, what it is made out of, and what color it is. This will be the most time consuming part of the whole task.
Some things will need to be dry cleaned, but you do not want to take these to a normal dry cleaning service. Make sure that the dry cleaning service that you are dealing with has experience in dealing with smoke damaged clothing items.
Sort your clothes. Lightly soiled clothing should be put into one group and heavily soiled items into another. Sort them further by dividing them into kinds of fabric. Put synthetic fabrics into one pile and organics such as wool and cotton in another. Further sort them by color type. Bright warm colors, cool colors, dark colors, and reds should be given their own group. Do not be concerned over whether there is enough in each pile to constitute a full load. Washing them separately like this is necessary.
Before you wash the heavily soiled clothing, take them outside and shake them out. The excess soot and ash need to be removed so that the water in the washing machine does not become too saturated with dirt to be of any real use. Heavily soiled clothes should be washed twice or more.
Use as much detergent as the washer requires and add about a cup of water conditioner to the mix. Some all-fabric bleach can also be used. Use as much water as your machine can handle for each load.
Synthetic items should be washed in warm water so that they do not start to wrinkle during the washer’s spin cycle. Wrinkles can be difficult to remove from synthetic fabrics.
Hang the clothes out to dry instead of using the dryer, but do not do this in your basement or a confined area. Clothes should never be hung to dry inside the house; only do this outside. After they dry, smell them and see if the smoke odor is still there. If it is, wash them again and repeat the drying process.
Fortunately for us, though, cleaning smoke damaged clothing is not always as difficult as some might make it out to be. You will need to sort your clothing fairly heavily, though, since there are so many factors involved. How soiled the clothing is, what it is made out of, and what color it is. This will be the most time consuming part of the whole task.
Some things will need to be dry cleaned, but you do not want to take these to a normal dry cleaning service. Make sure that the dry cleaning service that you are dealing with has experience in dealing with smoke damaged clothing items.
Sort your clothes. Lightly soiled clothing should be put into one group and heavily soiled items into another. Sort them further by dividing them into kinds of fabric. Put synthetic fabrics into one pile and organics such as wool and cotton in another. Further sort them by color type. Bright warm colors, cool colors, dark colors, and reds should be given their own group. Do not be concerned over whether there is enough in each pile to constitute a full load. Washing them separately like this is necessary.
Before you wash the heavily soiled clothing, take them outside and shake them out. The excess soot and ash need to be removed so that the water in the washing machine does not become too saturated with dirt to be of any real use. Heavily soiled clothes should be washed twice or more.
Use as much detergent as the washer requires and add about a cup of water conditioner to the mix. Some all-fabric bleach can also be used. Use as much water as your machine can handle for each load.
Synthetic items should be washed in warm water so that they do not start to wrinkle during the washer’s spin cycle. Wrinkles can be difficult to remove from synthetic fabrics.
Hang the clothes out to dry instead of using the dryer, but do not do this in your basement or a confined area. Clothes should never be hung to dry inside the house; only do this outside. After they dry, smell them and see if the smoke odor is still there. If it is, wash them again and repeat the drying process.
Water Damage Risk Areas
Correcting the water damage in your bathroom is usually a time consuming task depending on the severity of it, but the prevention of such damage is usually within the reach of most homeowners. The fact is that preventing this damage is usually much, much easier than the act of having to actually repair it after it has already occurred. Steam from showers and baths can discolor ceilings and cause mold growth, overflowing toilets onto cracked tile can lead to rotting of the floor underneath it, and there is always the possibility of mold growth. You should do what you can to protect this room in your home, since it is one of the most important rooms along with the kitchen.
There are a few different areas of your bathroom that you need to keep an eye on and look for any sign of abnormalities in on a regular basis. These areas that are the most at risk are the toilet, shower, bath tub, and the sink.
The bath tub and shower usually require some special attention, since these are the largest sources of water in the room and present the most risk. Over time, the tiles around the tub and shower can become cracked and if it is allowed to overflow, the floor underneath can become so damaged that the whole floor will need to be taken up and redone. Missing grout can also cause this. Repair the tile floor as soon as you notice cracks in it. Also make sure that the caulking around the tub is not loose or missing and if it is, you should re-caulk this yourself or have a professional do it for you.
Check the plumbing underneath the sink and make sure that there are no leaks. Loose seals in this plumbing should be replaced as soon as possible, as well.
The toilet can also overflow and the tile around this area can also be breached if it is cracked, so in the same manner as the area around the tub, the cracked tile needs to be dealt with. Keep your toilet from overflowing by not putting more paper in the toilet than it can handle. A lid lock can be purchased and put on toilets in homes that have small children that are prone to putting things in the toilet that do not belong there.
If you can see signs of moisture on the drywall, then you might also have a problem in the plumbing running through the walls. You need to call in a professional to deal with this problem.
There are a few different areas of your bathroom that you need to keep an eye on and look for any sign of abnormalities in on a regular basis. These areas that are the most at risk are the toilet, shower, bath tub, and the sink.
The bath tub and shower usually require some special attention, since these are the largest sources of water in the room and present the most risk. Over time, the tiles around the tub and shower can become cracked and if it is allowed to overflow, the floor underneath can become so damaged that the whole floor will need to be taken up and redone. Missing grout can also cause this. Repair the tile floor as soon as you notice cracks in it. Also make sure that the caulking around the tub is not loose or missing and if it is, you should re-caulk this yourself or have a professional do it for you.
Check the plumbing underneath the sink and make sure that there are no leaks. Loose seals in this plumbing should be replaced as soon as possible, as well.
The toilet can also overflow and the tile around this area can also be breached if it is cracked, so in the same manner as the area around the tub, the cracked tile needs to be dealt with. Keep your toilet from overflowing by not putting more paper in the toilet than it can handle. A lid lock can be purchased and put on toilets in homes that have small children that are prone to putting things in the toilet that do not belong there.
If you can see signs of moisture on the drywall, then you might also have a problem in the plumbing running through the walls. You need to call in a professional to deal with this problem.
Water Sanitation Options
The most important thing that you need to have plenty of on hand during a hurricane or tropical storm is simply clean water. Clean water may be more difficult to obtain during these times than you might think, so you need to try and have plenty of it stocked up beforehand if you live in an area that is prone to having these serious storms. If you happen to run out before the storm is completely over, though, there are a few things that you can do to make sure that you have enough to last you.
For every person that will be with you during the storm, you should be saving at least one gallon for them per day for use.
An electricity generator that is powered by gas might be a good thing to have around, as well, since electricity tends to go out during hurricanes and tropical storms, affecting your ability to boil water for drinking. You can boil water on your stove for about 10 minutes or so and make it safe to drink as long as you filter out any sediment that might be in it first. Do not drink flood water, since this will likely have more in it than you can get rid of by simply boiling it.
If you do not have electricity, using chlorinated bleach to sanitize water is also a good idea. You only have to use a couple of drops for each gallon of water you want to sanitize. Be aware that you should only use regular chlorinated bleach for this process. Do not use lemon or any other scented bleach.
When you filter water out of your tap for boiling, you should pour this through a clean (white, if possible) cloth and let the water set until it is no longer cloudy. Do not under any circumstances drink water straight out of the tap after the storm has hit, since your water treatment plant could be contaminated. Do not drink water out of the tap that has not been boiled until your local government says that your tap water is safe to drink.
If you do not have electricity or bleach, then using some water purification tablets to sanitize your water is also an option. Purchase some of these at an outdoor supply store where hiking and camping supplies are.
For every person that will be with you during the storm, you should be saving at least one gallon for them per day for use.
An electricity generator that is powered by gas might be a good thing to have around, as well, since electricity tends to go out during hurricanes and tropical storms, affecting your ability to boil water for drinking. You can boil water on your stove for about 10 minutes or so and make it safe to drink as long as you filter out any sediment that might be in it first. Do not drink flood water, since this will likely have more in it than you can get rid of by simply boiling it.
If you do not have electricity, using chlorinated bleach to sanitize water is also a good idea. You only have to use a couple of drops for each gallon of water you want to sanitize. Be aware that you should only use regular chlorinated bleach for this process. Do not use lemon or any other scented bleach.
When you filter water out of your tap for boiling, you should pour this through a clean (white, if possible) cloth and let the water set until it is no longer cloudy. Do not under any circumstances drink water straight out of the tap after the storm has hit, since your water treatment plant could be contaminated. Do not drink water out of the tap that has not been boiled until your local government says that your tap water is safe to drink.
If you do not have electricity or bleach, then using some water purification tablets to sanitize your water is also an option. Purchase some of these at an outdoor supply store where hiking and camping supplies are.
Water Sanitation Using Heat and Bleach
When you are having to sit a hurricane out in your home or other building, the most important thing that you need to have plenty of is clean water. Hurricanes are often something that we can prepare for in the United States, since we can typically see them coming, but failing to pay attention to the weather reports during hurricane season does happen to some of us.
You should have on hand about a gallon of clean water for every person staying with you. This will be used up in a day’s time, so having one gallon for every person for every day you expect the storm to last plus a few is a good idea.
Having a gas powered electricity generator is something else that you might want to have on hand, especially if you might not have enough water. If the electricity goes out and you run out of water, you will not be able to boil any water to make sure that it is sanitary before you drink it. During storms like this you should never assume that the tap water is alright to drink. Local water treatment plants could be contaminated with all kinds of things during this inclement weather and you should never drink it until the storm clears and your local government okays it.
Boiling water is the best way to sanitize it if you have no other means of doing so, such as a high quality water filter. Bring the water to a boil and keep it like this for about 5 to 10 minutes. Covering the boiling pot of water should shorten the time necessary to get the water boiling and will help you save fuel.
Liquid Clorox bleach can also be used to sanitize water. It can be used to purity tap water and make it safe for you to drink. This will kill any bacteria and microorganisms living in it and the process is fairly simple.
Any water should be let to stand in a container until any debris or sediment settles to the bottom. The clear water should be poured into another container, leaving the water still containing sediment in the bottom of the first one. You only need to use a couple of drops of bleach per quart of water.
As a backup for boiling and bleach, you can also purchase water purification tablets at most outdoor supply stores. People who go camping or hiking often take these with them in case they need them, but you can also benefit from keeping a few on hand.
You should have on hand about a gallon of clean water for every person staying with you. This will be used up in a day’s time, so having one gallon for every person for every day you expect the storm to last plus a few is a good idea.
Having a gas powered electricity generator is something else that you might want to have on hand, especially if you might not have enough water. If the electricity goes out and you run out of water, you will not be able to boil any water to make sure that it is sanitary before you drink it. During storms like this you should never assume that the tap water is alright to drink. Local water treatment plants could be contaminated with all kinds of things during this inclement weather and you should never drink it until the storm clears and your local government okays it.
Boiling water is the best way to sanitize it if you have no other means of doing so, such as a high quality water filter. Bring the water to a boil and keep it like this for about 5 to 10 minutes. Covering the boiling pot of water should shorten the time necessary to get the water boiling and will help you save fuel.
Liquid Clorox bleach can also be used to sanitize water. It can be used to purity tap water and make it safe for you to drink. This will kill any bacteria and microorganisms living in it and the process is fairly simple.
Any water should be let to stand in a container until any debris or sediment settles to the bottom. The clear water should be poured into another container, leaving the water still containing sediment in the bottom of the first one. You only need to use a couple of drops of bleach per quart of water.
As a backup for boiling and bleach, you can also purchase water purification tablets at most outdoor supply stores. People who go camping or hiking often take these with them in case they need them, but you can also benefit from keeping a few on hand.
Which Flooded Items Can I Save?
You may not be very sure what you can save after a flood wreaks havoc on the interior and exterior of your home, but there are some definite things that you can save and things that you will have to throw away.
Certain items that have been soaked in dirty flood water for many hours will probably not be salvageable. Wooden shutters, aluminum, wooden blinds, things made of vinyl, and etcetera can usually not be saved. Metal items will corrode and wooden items tend to warp over time, since it is porous and soaks up water easily.
Any pillows that were in the flood water need to be thrown out, since it will be hard to get rid of all the dirt from the material. It will also be difficult to completely disinfect them.
When you purchase a disinfectant, you should make sure that it is approved by the EPA and that it has a registration number somewhere on the label. This will assure you that the cleaner meets the EPA’s requirements. Having the correct disinfectant for the task at hand is also important. Some disinfectants are only effective on hard surfaces.
Before you begin washing your clothing and other fabrics, you should make sure that the water is safe to use and it not contaminated. If the tap water is safe to drink, it is safe to wash your clothes in. You also might want to make an effort to sanitize your washing machine before you use it. You can do this by running some detergent and bleach through the washer using the most water it can handle.
You can use a water hose to get rid of mud and dirt that is still on the floors of your home and on the furniture. Dried mud and dirt can be scraped and shaken off of most textiles.
When you are dealing with water damaged furniture, you have only a few options. If flood water reached the fabric, it may be stained and if they were in the water for more than a few hours, the silt and dirt that was in the water probably got through both the fabric and the padding. Unfortunately, padding will retain water and allow mold to grow. The majority of the time, your best bet will be to simply discard the upholstered furniture altogether. Restoring this furniture will mean stripping everything down to the frame.
If water gets through the finish on some wood items, it will mildew and the joints in the wooden frame of the item may also become loose.
Mattresses or box springs can be saved if they have come into contact with only a minimum of clean flood water (such as broken water pipes), but mattresses that have been come into contact with dirty flood waters cannot be due to the biological and chemical hazards that exist in them. You should not use a mattress that has a musty odor after it dries, since this means that mold is present. Have this item sanitized by a professional.
Certain items that have been soaked in dirty flood water for many hours will probably not be salvageable. Wooden shutters, aluminum, wooden blinds, things made of vinyl, and etcetera can usually not be saved. Metal items will corrode and wooden items tend to warp over time, since it is porous and soaks up water easily.
Any pillows that were in the flood water need to be thrown out, since it will be hard to get rid of all the dirt from the material. It will also be difficult to completely disinfect them.
When you purchase a disinfectant, you should make sure that it is approved by the EPA and that it has a registration number somewhere on the label. This will assure you that the cleaner meets the EPA’s requirements. Having the correct disinfectant for the task at hand is also important. Some disinfectants are only effective on hard surfaces.
Before you begin washing your clothing and other fabrics, you should make sure that the water is safe to use and it not contaminated. If the tap water is safe to drink, it is safe to wash your clothes in. You also might want to make an effort to sanitize your washing machine before you use it. You can do this by running some detergent and bleach through the washer using the most water it can handle.
You can use a water hose to get rid of mud and dirt that is still on the floors of your home and on the furniture. Dried mud and dirt can be scraped and shaken off of most textiles.
When you are dealing with water damaged furniture, you have only a few options. If flood water reached the fabric, it may be stained and if they were in the water for more than a few hours, the silt and dirt that was in the water probably got through both the fabric and the padding. Unfortunately, padding will retain water and allow mold to grow. The majority of the time, your best bet will be to simply discard the upholstered furniture altogether. Restoring this furniture will mean stripping everything down to the frame.
If water gets through the finish on some wood items, it will mildew and the joints in the wooden frame of the item may also become loose.
Mattresses or box springs can be saved if they have come into contact with only a minimum of clean flood water (such as broken water pipes), but mattresses that have been come into contact with dirty flood waters cannot be due to the biological and chemical hazards that exist in them. You should not use a mattress that has a musty odor after it dries, since this means that mold is present. Have this item sanitized by a professional.
Which Flooded Items You Can Salvage
After your home has been flooded, you might walk around it after the waters have receded and wonder to yourself just what you need to try to save and what you need to get rid of pretty quickly, since you know that contaminated items left in the home can infect everything else.
One of the first things that you need to know is that porous items, especially those that have a lot of padding, will need to be thrown away. This is because they need to be completely dried out so that mold does not start to grow in them and because these items can be difficult to disinfect, since padding makes it difficult for the disinfectant to get through the entire depth of it. This means that any bed or décor pillows will need to be thrown out, as well as any stuffed animals that you have for your children.
It will also be very hard to save upholstered furniture. The dirt, silt, and chemicals often found in flood waters will get past the outer fabric fairly easily if the item is in the water for more than a couple of hours and the padding inside will soak up quite a bit of it.
Saving your curtains and other fabric items that are exposed like this depends on how much damage was done to them. The dyes in the fabric may have bled or it may have become stained from being left in the water for so long.
Items like table cloths and towels can be saved if they are washed a few times in enough disinfectant, but even items that have not come into contact with the flood water can become molded after a few days if they are left in the house, due to the high humidity.
Any electric blankets that you may have that were exposed to the flood water will need to be completely thrown away. These items could possibly have wiring damage and can malfunction if you try to use them. They are in no way safe to continue using after being submerged in water.
Blankets can be washed, but you will need to do this a few times in hot water. Chlorine bleach can sanitize these items, but you will need to be careful what you use it on, since the dyes may run on some items. Try to find a laundry detergent that disinfects, as well. Borax detergent can be helpful in killing mold.
Wooden items that have had their finishes breached by flood waters may be contaminated and will need to be disinfected thoroughly.
One of the first things that you need to know is that porous items, especially those that have a lot of padding, will need to be thrown away. This is because they need to be completely dried out so that mold does not start to grow in them and because these items can be difficult to disinfect, since padding makes it difficult for the disinfectant to get through the entire depth of it. This means that any bed or décor pillows will need to be thrown out, as well as any stuffed animals that you have for your children.
It will also be very hard to save upholstered furniture. The dirt, silt, and chemicals often found in flood waters will get past the outer fabric fairly easily if the item is in the water for more than a couple of hours and the padding inside will soak up quite a bit of it.
Saving your curtains and other fabric items that are exposed like this depends on how much damage was done to them. The dyes in the fabric may have bled or it may have become stained from being left in the water for so long.
Items like table cloths and towels can be saved if they are washed a few times in enough disinfectant, but even items that have not come into contact with the flood water can become molded after a few days if they are left in the house, due to the high humidity.
Any electric blankets that you may have that were exposed to the flood water will need to be completely thrown away. These items could possibly have wiring damage and can malfunction if you try to use them. They are in no way safe to continue using after being submerged in water.
Blankets can be washed, but you will need to do this a few times in hot water. Chlorine bleach can sanitize these items, but you will need to be careful what you use it on, since the dyes may run on some items. Try to find a laundry detergent that disinfects, as well. Borax detergent can be helpful in killing mold.
Wooden items that have had their finishes breached by flood waters may be contaminated and will need to be disinfected thoroughly.
Which Flooded Items You Can Salvage
After your home has been flooded, you might walk around it after the waters have receded and wonder to yourself just what you need to try to save and what you need to get rid of pretty quickly, since you know that contaminated items left in the home can infect everything else.
One of the first things that you need to know is that porous items, especially those that have a lot of padding, will need to be thrown away. This is because they need to be completely dried out so that mold does not start to grow in them and because these items can be difficult to disinfect, since padding makes it difficult for the disinfectant to get through the entire depth of it. This means that any bed or décor pillows will need to be thrown out, as well as any stuffed animals that you have for your children.
It will also be very hard to save upholstered furniture. The dirt, silt, and chemicals often found in flood waters will get past the outer fabric fairly easily if the item is in the water for more than a couple of hours and the padding inside will soak up quite a bit of it.
Saving your curtains and other fabric items that are exposed like this depends on how much damage was done to them. The dyes in the fabric may have bled or it may have become stained from being left in the water for so long.
Items like table cloths and towels can be saved if they are washed a few times in enough disinfectant, but even items that have not come into contact with the flood water can become molded after a few days if they are left in the house, due to the high humidity.
Any electric blankets that you may have that were exposed to the flood water will need to be completely thrown away. These items could possibly have wiring damage and can malfunction if you try to use them. They are in no way safe to continue using after being submerged in water.
Blankets can be washed, but you will need to do this a few times in hot water. Chlorine bleach can sanitize these items, but you will need to be careful what you use it on, since the dyes may run on some items. Try to find a laundry detergent that disinfects, as well. Borax detergent can be helpful in killing mold.
Wooden items that have had their finishes breached by flood waters may be contaminated and will need to be disinfected thoroughly.
One of the first things that you need to know is that porous items, especially those that have a lot of padding, will need to be thrown away. This is because they need to be completely dried out so that mold does not start to grow in them and because these items can be difficult to disinfect, since padding makes it difficult for the disinfectant to get through the entire depth of it. This means that any bed or décor pillows will need to be thrown out, as well as any stuffed animals that you have for your children.
It will also be very hard to save upholstered furniture. The dirt, silt, and chemicals often found in flood waters will get past the outer fabric fairly easily if the item is in the water for more than a couple of hours and the padding inside will soak up quite a bit of it.
Saving your curtains and other fabric items that are exposed like this depends on how much damage was done to them. The dyes in the fabric may have bled or it may have become stained from being left in the water for so long.
Items like table cloths and towels can be saved if they are washed a few times in enough disinfectant, but even items that have not come into contact with the flood water can become molded after a few days if they are left in the house, due to the high humidity.
Any electric blankets that you may have that were exposed to the flood water will need to be completely thrown away. These items could possibly have wiring damage and can malfunction if you try to use them. They are in no way safe to continue using after being submerged in water.
Blankets can be washed, but you will need to do this a few times in hot water. Chlorine bleach can sanitize these items, but you will need to be careful what you use it on, since the dyes may run on some items. Try to find a laundry detergent that disinfects, as well. Borax detergent can be helpful in killing mold.
Wooden items that have had their finishes breached by flood waters may be contaminated and will need to be disinfected thoroughly.
Home Water Damage Causes
Despite the general knowledge that water damage is bad for any building, especially one’s home, it is not so well known just what all the possible causes for water damage are, or what factors can lead to it. The most common known causes of water damage are leaky plumbing, and leaking roofs, but there are mounds of other causes that are not as well known.
If you have a basement, and you have it insulated with fiberglass, it is easy for moisture to become trapped behind the walls, and air between one floor of the home and the basement floor can leak into them. It is because of this that insulating your home with fiberglass is not recommended, nor is installing plastic sheeting, as it is capable of trapping just as much moisture. A good idea for the insulation is using blue board, as it allows the moisture to move about the wall freely and makes the wall better able to dry off.
Problems, however, can arise if the land your home is on is sloped towards its foundation. If water is flowing towards the home, as opposed to away the home, it can seep into the basement and cause serious damage to the structure of your home, and can cause sink holes, which can cause your house to sink.
You should especially be careful to have your ceilings properly insulated in a cold climate, on account of the fact that they are not, water can leak into your house by way of what are called “ice dams”. In a warmer climate, flaws in air conditioning or air ducts can cause water damage by the formation of steam and humidity that likes to attach itself to things like roofing. And this build up can cause rotting on your roof as well as the infestation of mold, which can be harmful on one’s respiratory system as well as many other sicknesses that may result.
Improperly shielded attic hatches are another chief offender of water damage to one’s ceilings, as condensation is far more likely to gather in this manner. Lighting fixtures should be as tight as humanly possible when you install them, especially the recessed kind and exhaust fans are not directed outside from the house, it should be, whether they are in the bathroom, or places of this nature. Exhaust fans should have vents to the outside so moisture does not condense and cause avoidable water damage.
If you have a basement, and you have it insulated with fiberglass, it is easy for moisture to become trapped behind the walls, and air between one floor of the home and the basement floor can leak into them. It is because of this that insulating your home with fiberglass is not recommended, nor is installing plastic sheeting, as it is capable of trapping just as much moisture. A good idea for the insulation is using blue board, as it allows the moisture to move about the wall freely and makes the wall better able to dry off.
Problems, however, can arise if the land your home is on is sloped towards its foundation. If water is flowing towards the home, as opposed to away the home, it can seep into the basement and cause serious damage to the structure of your home, and can cause sink holes, which can cause your house to sink.
You should especially be careful to have your ceilings properly insulated in a cold climate, on account of the fact that they are not, water can leak into your house by way of what are called “ice dams”. In a warmer climate, flaws in air conditioning or air ducts can cause water damage by the formation of steam and humidity that likes to attach itself to things like roofing. And this build up can cause rotting on your roof as well as the infestation of mold, which can be harmful on one’s respiratory system as well as many other sicknesses that may result.
Improperly shielded attic hatches are another chief offender of water damage to one’s ceilings, as condensation is far more likely to gather in this manner. Lighting fixtures should be as tight as humanly possible when you install them, especially the recessed kind and exhaust fans are not directed outside from the house, it should be, whether they are in the bathroom, or places of this nature. Exhaust fans should have vents to the outside so moisture does not condense and cause avoidable water damage.
Mold and Your Carpet: A Wet Carpet Grows Mold
Nobody likes mold in the house, but whether we like it or not, mold will get into your home. It comes in the house attached to the bottoms of our shoes, attached to our clothing, and through the doors, windows, and the air conditioning unit. The only thing that you have control over is whether the conditions in your home are favorable for the mold to begin growing.
Something that mold loves to hide underneath is your carpet. If the carpet is old (especially if you have it in the bathroom), you can bet there is likely to be something living underneath it. Not only does mold like to hide under your carpet, it will also make a meal out of it. In order to reproduce, mold requires moisture, warmth, and food. The carpet provides part of the insulation that the mold needs to grow under it, so all that is left for you to provide is moisture either in the form of humidity or water spills that do not get cleaned up properly.
If you think that your carpet is moldy or mildewed, you can clean it with a biocide. Biocides are produced to stop things like mold and bacteria from growing where you do not want them to. Even if you use this, though, you will still have to remove the carpet padding underneath. This padding is not cleanable and will need to be thrown away. If your carpet has been completely submerged in water and it is not just a small area, it is advised to just tear it up and throw it away, as well. Cleaning a room’s entire carpet can be costly and it’s possible that you are better off just getting new carpet.
While you are cleaning your moldy carpet, you should wear gloves. After it has completely dried, using a vacuum that has a HEPA filter on it should remove any mold spores that still remain in the fibers of the carpet.
Having wall-to-wall carpeting is not advised. If you already have it, you can reduce the chances of mold and mildew growing by removing your shoes before walking on it and disallowing pets to enter carpeted areas. Using a good vacuum cleaner (with a HEPA filter) regularly will also help to stop mold from growing. HEPA filters are about 99.97 percent accurate in removing particles from your carpet and air.
Something that mold loves to hide underneath is your carpet. If the carpet is old (especially if you have it in the bathroom), you can bet there is likely to be something living underneath it. Not only does mold like to hide under your carpet, it will also make a meal out of it. In order to reproduce, mold requires moisture, warmth, and food. The carpet provides part of the insulation that the mold needs to grow under it, so all that is left for you to provide is moisture either in the form of humidity or water spills that do not get cleaned up properly.
If you think that your carpet is moldy or mildewed, you can clean it with a biocide. Biocides are produced to stop things like mold and bacteria from growing where you do not want them to. Even if you use this, though, you will still have to remove the carpet padding underneath. This padding is not cleanable and will need to be thrown away. If your carpet has been completely submerged in water and it is not just a small area, it is advised to just tear it up and throw it away, as well. Cleaning a room’s entire carpet can be costly and it’s possible that you are better off just getting new carpet.
While you are cleaning your moldy carpet, you should wear gloves. After it has completely dried, using a vacuum that has a HEPA filter on it should remove any mold spores that still remain in the fibers of the carpet.
Having wall-to-wall carpeting is not advised. If you already have it, you can reduce the chances of mold and mildew growing by removing your shoes before walking on it and disallowing pets to enter carpeted areas. Using a good vacuum cleaner (with a HEPA filter) regularly will also help to stop mold from growing. HEPA filters are about 99.97 percent accurate in removing particles from your carpet and air.
Mold and Your Food
We’ve all had mold in our refrigerator at some point or another, but most of us just accept that this is going to happen and there’s not much that we can do about it. Food ages in our refrigerator whether it’s a piece of fruit, a vegetable, or a jar of grape jelly and becomes moldy over time. This mold spreads to the other items in our fridge and contaminates them, as well. What can you do about it?
Well, storing your food in your refrigerator properly is one of the most important things that you can do. Mold, bacteria, and mildew will start to grow in your fridge if you don’t. Check your food items in the fridge regularly and if anything is showing signs of mold growth, remove it immediately.
Don’t leave cracked egg shells in the carton. Bacteria exists on the outside of the egg shells and once on the inside, even if you’ve removed most of the egg, some of it still remains on the inside of the shell and bacteria will feed on it.
There are some general rules if you find food that has mold growing on it. There are some kinds of cheeses that are made with mold, but sometimes we see a spot of it that shouldn’t be there, like on a block of cheddar cheese. You don’t have to throw the whole block away, just take a clean knife and cut off the moldy part. It’s best to cut about an inch around and an inch underneath the spot to make sure that it doesn’t contaminate the rest of the block and don’t touch your knife to the mold. Don’t bother trying to save any soft cheeses or individual slices or sour cream.
You should follow the same rule for things like country ham and hard salami. If it’s covered with mold, though, toss it.
Any fruits and vegetables that are showing mold can be treated this way as long as they’re hard natured. Soft ones like plums or tomatoes should be thrown away if you see mold.
Any grains that you see with mold on them should be thrown away immediately. Be careful about any organic food that you buy; these don’t contain any pesticides or preservatives, they’re more likely to have mold growth.
Any tissue in potatoes that looks black or discolored in any way should be cut off.
Well, storing your food in your refrigerator properly is one of the most important things that you can do. Mold, bacteria, and mildew will start to grow in your fridge if you don’t. Check your food items in the fridge regularly and if anything is showing signs of mold growth, remove it immediately.
Don’t leave cracked egg shells in the carton. Bacteria exists on the outside of the egg shells and once on the inside, even if you’ve removed most of the egg, some of it still remains on the inside of the shell and bacteria will feed on it.
There are some general rules if you find food that has mold growing on it. There are some kinds of cheeses that are made with mold, but sometimes we see a spot of it that shouldn’t be there, like on a block of cheddar cheese. You don’t have to throw the whole block away, just take a clean knife and cut off the moldy part. It’s best to cut about an inch around and an inch underneath the spot to make sure that it doesn’t contaminate the rest of the block and don’t touch your knife to the mold. Don’t bother trying to save any soft cheeses or individual slices or sour cream.
You should follow the same rule for things like country ham and hard salami. If it’s covered with mold, though, toss it.
Any fruits and vegetables that are showing mold can be treated this way as long as they’re hard natured. Soft ones like plums or tomatoes should be thrown away if you see mold.
Any grains that you see with mold on them should be thrown away immediately. Be careful about any organic food that you buy; these don’t contain any pesticides or preservatives, they’re more likely to have mold growth.
Any tissue in potatoes that looks black or discolored in any way should be cut off.
Mold Insurance Claim Advice
If you have mold damage to your home and it is due to something that’s covered in your insurance, such as water damage, a lot of the time it is covered. If it is a mold infection that has occurred over time, it is probably not covered. These are two general rules to go by if you’re trying to get your insurance company to cover the cost of removing the mold from your home.
Insurance companies are scrambling for reasons to deny insurance claims concerning mold and what adjusters and claim representatives like to tell people intending on filing a mold-related insurance claim is that mold has been around longer than people have and that it’s not as dangerous as all the hype is making it out to be. If you are going to file an insurance claim related to mold and they tell you that, it might be a good idea (especially if your claims adjuster is Jewish or Christian) to quote to them Leviticus 14:33-48. This is a scripture in the Bible that all but plainly records what the Lord has to say about mold and the dangers of it growing in the home. It says that the house is considered unclean and the mold should be removed and disposed of properly (i.e. away from where there are people). In this way, you will possibly have the upper hand because they will no longer be able to say that mold has only been recently seen as a problem when it grows in the home. Even if you are not Jewish or Christian, the text does prove that mold has not only existed as long as people have, but that it has been a problem just as long.
If you can prove that the mold in your home was a secondary problem caused by something that is covered by your insurance, your company might cover the funds needed to correct the problem. Read over your policy and determine what is covered by your insurance policy and what is not. Whatever you do, do not let your insurance adjuster sneakily get you to agree that the mold in your home has been around for a long time or that there could be a water leak hidden somewhere near the infection. As soon as you even remotely agree to something like this, they have you where they want you. Wait until any and all investigation into the problem is completed before you agree to anything with your insurance company.
List everything you need to have covered, including the cost of you having to relocate while the mold remediation is taking place and make sure you get all of the benefits that you are supposed to get under your policy.
Insurance companies are scrambling for reasons to deny insurance claims concerning mold and what adjusters and claim representatives like to tell people intending on filing a mold-related insurance claim is that mold has been around longer than people have and that it’s not as dangerous as all the hype is making it out to be. If you are going to file an insurance claim related to mold and they tell you that, it might be a good idea (especially if your claims adjuster is Jewish or Christian) to quote to them Leviticus 14:33-48. This is a scripture in the Bible that all but plainly records what the Lord has to say about mold and the dangers of it growing in the home. It says that the house is considered unclean and the mold should be removed and disposed of properly (i.e. away from where there are people). In this way, you will possibly have the upper hand because they will no longer be able to say that mold has only been recently seen as a problem when it grows in the home. Even if you are not Jewish or Christian, the text does prove that mold has not only existed as long as people have, but that it has been a problem just as long.
If you can prove that the mold in your home was a secondary problem caused by something that is covered by your insurance, your company might cover the funds needed to correct the problem. Read over your policy and determine what is covered by your insurance policy and what is not. Whatever you do, do not let your insurance adjuster sneakily get you to agree that the mold in your home has been around for a long time or that there could be a water leak hidden somewhere near the infection. As soon as you even remotely agree to something like this, they have you where they want you. Wait until any and all investigation into the problem is completed before you agree to anything with your insurance company.
List everything you need to have covered, including the cost of you having to relocate while the mold remediation is taking place and make sure you get all of the benefits that you are supposed to get under your policy.
Mold Precautions for the Work Area
A thorn in the side of any and every workplace is mold. Mold is a very dangerous form of fungus that can get into our lungs and cause all kinds of nasty ailments such as asthma, colds, fatigue, bleeding in the lungs, rashes, uncontrollable coughing, and even chronic dandruff. Employers, as well as employees should take precautions to make sure that mold has not infected their work environment. It is also important to make sure that employers and employees immediately report if they experience any of the aforementioned symptoms. If so, professional help may need to be called in to clean out the mold and prevent further infestation.
If a mold inspector is called in and he or she does find mold, it is important that you inform your employees of the mold, and that the problem is indeed being taken care of. It is also important that you inform them of the measures that will be taken during the removal of the unwanted guest. The United States Occupational Safety and Health Administration (OSHA) strongly recommends that you do this for the safety of the employees. The important thing to tell the employees is when the remediation will begin and for how long, so that they know if they will have to make arrangements for the current situation. And if any employees begin to exhibit any health complications or symptoms brought on by exposure to mold, it is strongly recommended that they see their doctor before these symptoms worsen, and that they see an expert on medical effects of mold.
Once the infestation has been cleared out of the workplace, there is a test that must be passed in order for your employees to return. If the test is not passed, you will have to wait longer, but it’s not worth the safety of your employees to go cheap on these necessary precautions. Once the test has finally been passed, you can move your employees back into their respective work areas.
If you have chosen to simply ignore the mold infestation, you are liable for medical bills of your employees, and you could be in danger of losing your business. Of course, this can only happen if it is possible to proven that you knew of the infestation and chose to do nothing about it. However, it is definitely recommended to not ignore the infestation and shell out the cash to have it cleared out as soon as possible.
If a mold inspector is called in and he or she does find mold, it is important that you inform your employees of the mold, and that the problem is indeed being taken care of. It is also important that you inform them of the measures that will be taken during the removal of the unwanted guest. The United States Occupational Safety and Health Administration (OSHA) strongly recommends that you do this for the safety of the employees. The important thing to tell the employees is when the remediation will begin and for how long, so that they know if they will have to make arrangements for the current situation. And if any employees begin to exhibit any health complications or symptoms brought on by exposure to mold, it is strongly recommended that they see their doctor before these symptoms worsen, and that they see an expert on medical effects of mold.
Once the infestation has been cleared out of the workplace, there is a test that must be passed in order for your employees to return. If the test is not passed, you will have to wait longer, but it’s not worth the safety of your employees to go cheap on these necessary precautions. Once the test has finally been passed, you can move your employees back into their respective work areas.
If you have chosen to simply ignore the mold infestation, you are liable for medical bills of your employees, and you could be in danger of losing your business. Of course, this can only happen if it is possible to proven that you knew of the infestation and chose to do nothing about it. However, it is definitely recommended to not ignore the infestation and shell out the cash to have it cleared out as soon as possible.
Mold Trouble in Florida
If you live in Florida, you have probably experienced some damage to your home due to hurricanes, especially water damage. Mold also likes to start growing in homes that have been water damaged after hurricanes and other storms, especially since Florida is characterized by warm and moist weather. Mold can start to grow in these homes after about 48 hours, so it’s important to get any standing water in the home removed and the home dried out as soon as possible.
A large amount of all the buildings in Florida have to deal with some kind of water or mold damage and a lot of the time this is due to the frequent hurricanes that hit the state almost every single year. The electricity goes down and people are not able to use their air conditioners to help air out and dry the home. Air conditioners can also help to remove humidity by keeping the house at a certain temperature.
If you want to have a healthy and safe indoor environment to live in, you need to make sure your air conditioner is properly serviced as often as is necessary. If it is an old system and has a lot of problems, it is probably best to just replace it instead of doing work on it repeatedly.
Sometimes indoor air quality tests need to be done and not just in Florida. Mold testing should be done and while it’s become a multi-million dollar business industry, it is a necessary one. Mold has been proved to be very harmful to human (and animal) health. When you choose a company to do mold testing or remediation keep it in mind not to choose the same company to do both for you. If a company does both mold testing and removal, it is in their best interest for them to find mold on your property, so even if they say there is mold there, it might not be.
Make sure they have the latest technology in mold testing such as infrared thermal cameras, mold spore counters, air moisture meters, and etcetera. The company should also have a microbiologist in house and certified mold inspectors.
They should inspect the air conditioner, the exterior, plumbing, and they should perform moisture tests around the whole house.
You should do these things even if you do not live in Florida, but a large part of the state of Florida is at risk for water and mold damage because of the moisture and humidity that can exist there.
A large amount of all the buildings in Florida have to deal with some kind of water or mold damage and a lot of the time this is due to the frequent hurricanes that hit the state almost every single year. The electricity goes down and people are not able to use their air conditioners to help air out and dry the home. Air conditioners can also help to remove humidity by keeping the house at a certain temperature.
If you want to have a healthy and safe indoor environment to live in, you need to make sure your air conditioner is properly serviced as often as is necessary. If it is an old system and has a lot of problems, it is probably best to just replace it instead of doing work on it repeatedly.
Sometimes indoor air quality tests need to be done and not just in Florida. Mold testing should be done and while it’s become a multi-million dollar business industry, it is a necessary one. Mold has been proved to be very harmful to human (and animal) health. When you choose a company to do mold testing or remediation keep it in mind not to choose the same company to do both for you. If a company does both mold testing and removal, it is in their best interest for them to find mold on your property, so even if they say there is mold there, it might not be.
Make sure they have the latest technology in mold testing such as infrared thermal cameras, mold spore counters, air moisture meters, and etcetera. The company should also have a microbiologist in house and certified mold inspectors.
They should inspect the air conditioner, the exterior, plumbing, and they should perform moisture tests around the whole house.
You should do these things even if you do not live in Florida, but a large part of the state of Florida is at risk for water and mold damage because of the moisture and humidity that can exist there.
Penicillin and Your New Baby
Ever since Penicillin was put into mass production back in the 1940’s, it has been noted that some people have experienced adverse reactions to the drug. What is penicillin?
Penicillin is an antibiotic that has been used for the past 70 years or so to treat different kinds of illnesses and infections. It comes from the mold penicillin notatum, which is a blue-green kind of mold sometimes found growing on food. Before the invention of this drug, infections and diseases that are only minor to us could very well be fatal. Because it is made from mold and reproduces quickly, it’s not very difficult to manufacture at all and therefore it is the most popular antibiotic in use worldwide today.
If you are allergic to penicillin or know someone who is, you might know a bit about what to expect if your new baby is allergic. If not, you should know that an allergic reaction to penicillin, especially at such a young age, can be fatal. These reactions can be anything from a simple skin rash all the way to breathing difficulties that can be life-threatening. If you go to a doctor regularly, you should have had to answer a question on a form that asked if you were allergic to penicillin. This is so they know whether or not they can administer the drug if you are admitted to the hospital because it is the most frequently occurring drug allergy in existence today.
Even though penicillin is a drug made from mold designed to help us fight infections, you can be allergic to it like any other mold. The medical industry is unsure why some people have reactions to penicillin and some do not, but knowing if you are allergic is very important. Some only have minor symptoms when exposed to the drug and some can be put near death by it. The only treatment for being allergic to the drug is simply not to use it. There are other antibiotics that can be used to fight infections besides penicillin.
The symptoms of a penicillin allergy include swollen lips, tongue, and face or sometimes rashes or hives that can cover a large area of the body. The most life-threatening reaction to the drug is when the bronchial airway becomes extremely swollen and it causes difficulty breathing. This can be followed by a drop in your blood pressure and will cause lightheadedness. This kind of reaction can be fatal and if you experience any of these symptoms after receiving a dose of penicillin, you should tell your doctor as soon as you can. If you are allergic, it’s possible that your newborn will be allergic as well, so your child’s doctor needs to know this before giving them a dose of the drug.
Penicillin is an antibiotic that has been used for the past 70 years or so to treat different kinds of illnesses and infections. It comes from the mold penicillin notatum, which is a blue-green kind of mold sometimes found growing on food. Before the invention of this drug, infections and diseases that are only minor to us could very well be fatal. Because it is made from mold and reproduces quickly, it’s not very difficult to manufacture at all and therefore it is the most popular antibiotic in use worldwide today.
If you are allergic to penicillin or know someone who is, you might know a bit about what to expect if your new baby is allergic. If not, you should know that an allergic reaction to penicillin, especially at such a young age, can be fatal. These reactions can be anything from a simple skin rash all the way to breathing difficulties that can be life-threatening. If you go to a doctor regularly, you should have had to answer a question on a form that asked if you were allergic to penicillin. This is so they know whether or not they can administer the drug if you are admitted to the hospital because it is the most frequently occurring drug allergy in existence today.
Even though penicillin is a drug made from mold designed to help us fight infections, you can be allergic to it like any other mold. The medical industry is unsure why some people have reactions to penicillin and some do not, but knowing if you are allergic is very important. Some only have minor symptoms when exposed to the drug and some can be put near death by it. The only treatment for being allergic to the drug is simply not to use it. There are other antibiotics that can be used to fight infections besides penicillin.
The symptoms of a penicillin allergy include swollen lips, tongue, and face or sometimes rashes or hives that can cover a large area of the body. The most life-threatening reaction to the drug is when the bronchial airway becomes extremely swollen and it causes difficulty breathing. This can be followed by a drop in your blood pressure and will cause lightheadedness. This kind of reaction can be fatal and if you experience any of these symptoms after receiving a dose of penicillin, you should tell your doctor as soon as you can. If you are allergic, it’s possible that your newborn will be allergic as well, so your child’s doctor needs to know this before giving them a dose of the drug.
Preventing Water Damaging in Electronics
People would not get as bent out of shape about their cell phone getting wet if it wasn’t for the reason that they were probably using it at the time. Often is the case that electronics cease to function once they make contact with water because the device is powered on when it hits the liquid. If you are one of the unfortunate many who has dropped a electronic device in the drink, don’t worry about it. Just make sure that it wasn’t on when you dropped it in. While water can cause damage to electronics, the electricity that causes it to work is what causes the machine to fry like an egg on the windshield of your car in triple digit weather. Turning on your device after it has been submerged will cause the electric current to run through it and will usually render the device useless.
There are obvious ways to prevent your device from being submerged in water. One such way is called being careful. But this method isn’t always effective. If your device is, let’s say, a cell phone, a cover for it is your best bet. While a cover won’t always, well, cover it, it will be a great way to prevent a good deal of moisture. If, say, your computer has some water spilled on it (and just what are you doing with liquids around your computer, anyway?) you should IMMEDIATELY unplug it and wait for roughly two weeks so that it has dried out, and there is no water to cause its very unpleasant death. It is very important that you keep the device in a cool, dry area that won’t pick up condensation, because that will cause the device to take longer to dry, and additional water damage can be done. It is also important to wait for a week or two, and to make sure that you do NOT shake the device to see if there is still water in it. This can just cause damage to the device, and then you will have waited for probably nothing.
Now, if you are the kind of person who doubts their repertoire of electronics knowledge, it’s best to simply take the device to an electronics repairman. You will have to shell out a few bucks, but not as many as you paid for the device. This can also be taken as a chance to make sure there is nothing else wrong with the device that should be fixed before it is used again.
There are obvious ways to prevent your device from being submerged in water. One such way is called being careful. But this method isn’t always effective. If your device is, let’s say, a cell phone, a cover for it is your best bet. While a cover won’t always, well, cover it, it will be a great way to prevent a good deal of moisture. If, say, your computer has some water spilled on it (and just what are you doing with liquids around your computer, anyway?) you should IMMEDIATELY unplug it and wait for roughly two weeks so that it has dried out, and there is no water to cause its very unpleasant death. It is very important that you keep the device in a cool, dry area that won’t pick up condensation, because that will cause the device to take longer to dry, and additional water damage can be done. It is also important to wait for a week or two, and to make sure that you do NOT shake the device to see if there is still water in it. This can just cause damage to the device, and then you will have waited for probably nothing.
Now, if you are the kind of person who doubts their repertoire of electronics knowledge, it’s best to simply take the device to an electronics repairman. You will have to shell out a few bucks, but not as many as you paid for the device. This can also be taken as a chance to make sure there is nothing else wrong with the device that should be fixed before it is used again.
Wednesday, January 16, 2008
Invisible Molds like Aspergillus and Penicillium
Looking around for mold growth in your home is a burden that no one wants to have to take on, but sometimes not looking for it can cost you thousands of dollars in renovations later on after the growth has gotten so bad that the affected areas have to be completely gutted. Knowing how to spot mold early on is the key to saving all of this time and money, but it is not always as visible as some pictures on the internet and the news may have you believe. While mold does come in a variety of colorful species, it is not always as colorful as most of the images you come across.
Some molds are nigh invisible and grow on a few different surfaces mostly undetected unless you know how you need to look for them. Wood paneling, for example, can have mold growing on it and you not even realize it without the use of a simple bright flashlight. To be able to see the mold, however, you will need to know how to use the flashlight correctly. Instead of shining the light directly toward the paneling, you need to shine it along the surface of the paneling at an angle, so as to give the possible mold growth some depth. Only in this way will you be able to detect the extremely light colored molds growing on the different surfaces of your home. These molds tend to be a species in the Aspergillus or Penicillium genus.
Wood paneling is common in older homes and in homes that have been flood damaged, since replacing the affected drywall is a lot more expensive than simply installing paneling in its place. This is one reason mold likes to grow on this paneling: it is typically old and should be replaced.
You can miss these molds easily when you do a casual inspection of your home, but just taking a flashlight with you and knowing how to use it can save you a lot of money in the end. Molds that are not visible to you readily are not necessarily harmless; they can be just as detrimental to the building structure and your health as the molds that you do have the ability to see with the naked eye. Mold is not always an invisible threat, but it certainly can be, even if you think you know how to look for it.
Some molds are nigh invisible and grow on a few different surfaces mostly undetected unless you know how you need to look for them. Wood paneling, for example, can have mold growing on it and you not even realize it without the use of a simple bright flashlight. To be able to see the mold, however, you will need to know how to use the flashlight correctly. Instead of shining the light directly toward the paneling, you need to shine it along the surface of the paneling at an angle, so as to give the possible mold growth some depth. Only in this way will you be able to detect the extremely light colored molds growing on the different surfaces of your home. These molds tend to be a species in the Aspergillus or Penicillium genus.
Wood paneling is common in older homes and in homes that have been flood damaged, since replacing the affected drywall is a lot more expensive than simply installing paneling in its place. This is one reason mold likes to grow on this paneling: it is typically old and should be replaced.
You can miss these molds easily when you do a casual inspection of your home, but just taking a flashlight with you and knowing how to use it can save you a lot of money in the end. Molds that are not visible to you readily are not necessarily harmless; they can be just as detrimental to the building structure and your health as the molds that you do have the ability to see with the naked eye. Mold is not always an invisible threat, but it certainly can be, even if you think you know how to look for it.
Subscribe to:
Posts (Atom)
