“Water, water everywhere and not a drop to drink” is a saying that most of us are familiar with and unfortunately for those of us who live in hurricane and tropical storm prone areas, there may be some real truth to it. The amount of water that is clean and sanitary to drink during these storms is very limited if you do not have enough water saved up in advance.
You need to keep plenty of clean bottled water on hand during hurricane season and doing this is not very difficult. Save milk jugs and store tap water in them. Try to keep them in an area of your home that is high up, so you are sure that flood waters will not contaminate them. Keep around at least one gallon of water for each person staying with you during the storm for every day you expect the storm to last and then some. Running out of clean water is not something you want to do.
Boiling tap water is an option if you have electricity. If not, a small gas powered generator can do the trick if you are without power for a significant period and can really be a life saver. Filter the water first through a cloth to get any sediment that may have gotten into the local water supply out before you let it set for a while. Put the clear water into a pot and boil for about ten minutes or so. This should give you clean water to drink or bathe in. You should never drink water from your faucet during a hurricane or flood, because of the risk of the local water supply being contaminated with sea water or sewage. Flood water or sea water also cannot be boiled to the point of being safe to drink, since it may be contaminated with more biohazards and chemicals than boiling can get rid of.
A couple of drops of bleach in a gallon of water can also sanitize it, but you should not use scented bleach for this. Allow the water to set for about 30 minutes or longer before drinking it. Do not be alarmed about this idea, since bleach has been used in water supplies for years to sanitize the water that we drink.
Water purification tablets are also available for purchase at most outdoor or camping supply stores. These can be used in the place of heat or bleach in sanitizing water.
Showing posts with label Invisible. Show all posts
Showing posts with label Invisible. Show all posts
Tuesday, January 22, 2008
Wednesday, January 16, 2008
Invisible Molds like Aspergillus and Penicillium
Looking around for mold growth in your home is a burden that no one wants to have to take on, but sometimes not looking for it can cost you thousands of dollars in renovations later on after the growth has gotten so bad that the affected areas have to be completely gutted. Knowing how to spot mold early on is the key to saving all of this time and money, but it is not always as visible as some pictures on the internet and the news may have you believe. While mold does come in a variety of colorful species, it is not always as colorful as most of the images you come across.
Some molds are nigh invisible and grow on a few different surfaces mostly undetected unless you know how you need to look for them. Wood paneling, for example, can have mold growing on it and you not even realize it without the use of a simple bright flashlight. To be able to see the mold, however, you will need to know how to use the flashlight correctly. Instead of shining the light directly toward the paneling, you need to shine it along the surface of the paneling at an angle, so as to give the possible mold growth some depth. Only in this way will you be able to detect the extremely light colored molds growing on the different surfaces of your home. These molds tend to be a species in the Aspergillus or Penicillium genus.
Wood paneling is common in older homes and in homes that have been flood damaged, since replacing the affected drywall is a lot more expensive than simply installing paneling in its place. This is one reason mold likes to grow on this paneling: it is typically old and should be replaced.
You can miss these molds easily when you do a casual inspection of your home, but just taking a flashlight with you and knowing how to use it can save you a lot of money in the end. Molds that are not visible to you readily are not necessarily harmless; they can be just as detrimental to the building structure and your health as the molds that you do have the ability to see with the naked eye. Mold is not always an invisible threat, but it certainly can be, even if you think you know how to look for it.
Some molds are nigh invisible and grow on a few different surfaces mostly undetected unless you know how you need to look for them. Wood paneling, for example, can have mold growing on it and you not even realize it without the use of a simple bright flashlight. To be able to see the mold, however, you will need to know how to use the flashlight correctly. Instead of shining the light directly toward the paneling, you need to shine it along the surface of the paneling at an angle, so as to give the possible mold growth some depth. Only in this way will you be able to detect the extremely light colored molds growing on the different surfaces of your home. These molds tend to be a species in the Aspergillus or Penicillium genus.
Wood paneling is common in older homes and in homes that have been flood damaged, since replacing the affected drywall is a lot more expensive than simply installing paneling in its place. This is one reason mold likes to grow on this paneling: it is typically old and should be replaced.
You can miss these molds easily when you do a casual inspection of your home, but just taking a flashlight with you and knowing how to use it can save you a lot of money in the end. Molds that are not visible to you readily are not necessarily harmless; they can be just as detrimental to the building structure and your health as the molds that you do have the ability to see with the naked eye. Mold is not always an invisible threat, but it certainly can be, even if you think you know how to look for it.
Subscribe to:
Posts (Atom)
